This tutorial will show you how to build a jacket with turn signals that will let people know where you’re headed when you’re on your bike. We’ll use conductive thread and sewable electronics so your jacket will be soft and wearable and washable when you’re done. Enjoy! A version of this tutorial is also on my […]
Turn signal biking jacket using microcontroller using atmega Read More »
In this project i have interfaced an GPS with AVR microcontroller, the ATtiny2313 gets the location from the GPS and display it over the LCD display. This project also have the feature of marking a place with its name. For entering the Name of the place i have used the PC-AT Keyboard. At starting the microcontroller will display the latitude and longitude on the LCD display
AVR GPS Locator using avr microcontroller Using Atmega Read More »
Shield for Arduino designed and based on the module GSM/GPRS SIM900 or the GSM/GPRS & GPS module SIM908, to make calls, voice and data connections via GPRS allow maximum customization and provide many configurations. With a microphone and a headset with a 3.5 mm jack (just the standard headphones for computers), you can make a voice call from
GSM GPS module shield for Arduino using atmega Read More »
If this is your first time on the Cornell Campus, you need not worry! Cause we have the best guide for you! Introduction The Cornell Campus is quite large, and finding your way around can get a bit frustrating. The Big Red Guide is a GPS receiver that displays your position on an LCD, as
The Big Red Guide Using Atmel AVR Mega32 Read More »
Introduction The goal of this project was to create a portable GPS logger that could be wireless triggered by an external device, such as a camera. Our device that we have designed operates in two modes. The first works as a basic GPS logger, which records GPS position information at timed intervals. The second mode
GPS Data Logger with Wireless Trigger Using Atmega644 Read More »
Introduction The Haptic Appointment Manager manages all of an individuals appointments, ensuring they arrive on time and in the right location by subtly guiding them throughout the day. This system uses a GPS receiver and a compass to maintain awareness of its absolute and rotational position. By interfacing with a calendar of time stamped waypoints,
Haptic appointment manager Using Atmega644 Read More »
Introduction Navigation in the past has primarily relied on the use of a map, compass or other devices that must be interpreted visually. This project demonstrates the ability to navigate a user based on synthesized directional audio which allows the user to move to a known location without the use of a visual aid. The
Auditory navigator Using Atmega644 Read More »
Introduction “A GPS tracking devices capable of telling the user his/her approximate distance to buildings and attractions on a map downloaded from a remote station” -Project Soundbyte For our final project in ECE4760, we designed an GPS tracking device that has a capability of downloading maps from a remote server, and then calculating distances from
GPS Tracking Device for Cornell Engineering Quad Using Atmega644 Read More »
Introduction to the Device Beac0n allows us to explore the tacit human understanding of technological feedback. The Beac0n is a gps pathfinder that is designed to be completely intuitive to the user. The goal is for the user to pick up the device, and with a small amount of exploration, understand it and its functions
Beacon: A Zero Instruction Navigation Device Using atmega1284 Read More »
Runners who have moved to a new city may get lost trying to remember the route they carefully planned at home. Instead of stopping the run to pull out a phone, wait for the map to load, find where you are, and determine where you need to go, why not carry something that will automatically
GPS Running Watch Using Atmega1284 Read More »
